How to build a charging station for multiple devices | Popular Scie…
https://www.popsci.com/diy/diy-charging-station-for-multiple-devices/
How to build a DIY charging station 1. Mill your boards down to size. ... 2. Cut rabbets in the top and bottom boards. ... 3. Cut access holes in the side boards. ... 4. Sand all the pieces to 150-grit. ... 5. Glue the side panels onto the bottom. ... 6. Cut shallow dados into the cover for the device stands. ... 7. Glue the stands into the dados. ... 8. Fill in any holes and gaps. ...
1. Mill your boards down to size. ...
2. Cut rabbets in the top and bottom boards. ...
3. Cut access holes in the side boards. ...
4. Sand all the pieces to 150-grit. ...
5. Glue the side panels onto the bottom. ...
6. Cut shallow dados into the cover for the device stands. ...
7. Glue the stands into the dados. ...
8. Fill in any holes and gaps. ...
DA: 75 PA: 91 MOZ Rank: 7